INSTRUCTIONS FOR USE

Easy as one, two, three!

Step 1.
Select compression range by turning the AeroGauge™ dial until the built in arrow points to the desired range (20-30 mmHg, 30-40 mmHg, or 40-50 mmHg).

Step 2.
Firmly insert the tip of the AeroGauge™ inflation system into the Valve, depressing the internal valve spring. Gently squeeze AeroGauge™ to inflate Aero-Wrap™ to pressure (approx. 10-15 squeezes).

Step 3.
Wait 3-5 seconds as the garment settles on the leg and then remove the AeroGauge™ tip from the Valve. Replace the Valve Cap on top of Valve.

Note: AeroGauge™ has been specifically designed to bleed out excess air from Aero-Wrap™ to provide the correct compression range.

DO NOT COVER AEROGAUGE™ DIAL WHILE INFLATING.